Відео

bs

Hi, thanks for the demo! What is the tork of the device?

Бы к

Hi Filip did you exchange Scheppach Basa 3 to Makita ? Is it better ?

tem que aprender muito pra se tornar um artesao

Super!

Mommy i want this chainsaw not the loud one! -phantomx at 2018 may

What kind of wood are you using for this test?

Ideia genial! 👏👏👏👏👏

جميل اللهم بارك ❤❤

Hello, is its motor brushless? Thanks

Some people just have no idea about electricity, amps and volts.

That little power supply is only to charge the battery so it would not have enough amps to run the drill direct, you need a much bigger amp output to have any power, it will go around no problem but it will not have any power and why didn't you get rid of the batteries to save some weight.

Order nga ako

is possilbe to mount a jaw chuck on this machine, to turn bowls? what kind of chuck can be mounted?

Company ache se bundbak banata he pasewale ko 100 ka saman 10000 pe

Pmsl... you don't use wet wood in a lathe.

FYI - the Dremel Moto - Tool Model 395 Type 4 has a 1/2 inch 12 TPI curvi-linear plastic nut on the business end. THAT can be replaced with a Hex-headed Plastic Pipe adapter. Buy a white plastic 1/2" Female Threaded ADAPTER (female hexheaded threaded to glue on end of pipe end) and that 12 tpi fits the Dremel Moto-Tool. Cut off the smooth glue on end down to the shoulder. THIS works and gives you a Hex end on the Dremel tool. Cost under $3 at any hardware store.

Пълен боклук е това, сега ще се чудя как да го продавам. Има китайски варианти за 20-30 лв повече с повече аксесоари, куфар, резервна верига, по-големи батерии и по-мощен мотор. Това е абсолютен ташак, веригата му е тъпа от завода още подскача по клоните. Когато я натиснеш леко спира на секундата за да не изгори моторчето. Ако мислите да купувате подобни резачки гледайте да има резервоарче за масло и поне да е 15 см шина. Ако искате китаец вземете Деу или най-добре Парксайд. Парксайда са по 120-150 лв но са от друга планета сравнени с това. За 40 лв няма да мога да го продам. Иначе Макита и Девалт са истината, но моделите им са по 360 лв на промоция без батерия и зарядно...

Aonde acha pra compra ?

Wow! Quiet fast!

A rotiranje ručke lijevo-desno i gore-dolje?

השאלה מה המחיר

😂🤦🏼‍♂️

Some of the digging was done with the chisel upside down, was it on purpose or by mistake?

4250 has Lots of Power tho, the rpm Wheel comes in so handy

Great video - now I don't need/want to buy one

Great job ...

A W E S O M E

Product link

Would it be useful for bigger things?

EXCELLENT

Вообще не парился, молоток

For all you guys interested in converting a cordless drill to electric. Get a used hammond transformers or jefferson electric transformer (12V AC 150 W). Get a used one from someone who works for the local power / hydro company. Then use a diode to convert it into DC (RMS about 17V DC). Run your 12 V to 20V drill with this. Your drill will have high torque due to the Amps from these power transformers.These transformers last you a life time.

Neat job. 👍

Did you actually use this lathe for extended period of time? I'm guessing attaching such a huge block of wood to the dremel is really bad for the bearings. And kills the dremel very fast. Plus - face protection is necessary.

Thanks, I will not buy this

Parkside tutti catarri a poco prezzo da non acquistare.

Nice what size blade did you use

Beautifully done ❤

Where do you charge it?

3:05 you have cut all that with one battery charge??

Well done but your video completely useless. No explanation what did you use

What a lot of snobbery from some people on here. It is a beginners lathe. Try it and see if you take to wood turning and then if the answer is yes, you can upgrade to a better piece of equipment. Or maybe go out and spend £2k upwards and find out turning is not for you. I certainly know which route I would suggest.

Using a spindle roughing gouge on a bowl blank???? 😮😮😮

Wtf are you doing dude?? That is not how you do it and wrong in so many ways good luck until you blow that thing up

Thanks As a lathe it’s crap

I have an MS 250, went out for fire wood this past week, used the 250 to drop and buck the trees, used the 140 to trim and prune. worked it hard for 2 days. Just put the battery on to charge, still has 1.25 bars left on the battery when I put it in the charger. Much nicer using it to [prune, more safe in my opinion

جميل 👍👍👍

Very poor technique, improper tool use, big blank and blunt tools . . . there’s nothing wrong with the lathe, but it is a cheap hobby machine and you are expecting too much from it.